Harman Stove Company R16 User Manual download pdf (Page 23)

XXV Pellet Stove

The room sensor is a small temperature sensor

on the end of a 60" wire. This sensor is installed

much like a standard wall thermostat. Because

it is so small, it can be hidden along the trim of a

doorway or even up the leg of a coffee table. There

is a remote room sensor port on the rear of the

unit for easy external connection. Use standard

18-2 thermostat wire to extend the distance to the

desired location (50' maximum). The room sensor

should be installed in the location where you want

to control the temperature.

In most installations locating the room sensor

behind the stove near the distribution fan works

well because the sensor monitors the room air

being drawn into the distribution fan.

Distances of more than 25 feet from the

unit or in another room are not recommended. The

room sensor is essential for the XXV's excellent

efciency.

 

 even if only installed on the rear of

the unit as a return air sensor.



Fig. 32

Fig. 31



1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

No comments

Harman Stove Company R16 User Manual Page 23